Kenwood KE-7090 Instruction Manual page 10

eta ern rT GU TPT Mg ASST AG RST RS ys DST SST TLS T E
MAIN POWER le KENWOOo
KE-7090 (En}
2 Select the desired display mode.
DISPLAY i [
Each press switches the display modes as follows.
@) Graphic equalizer display mode
@) Spectrum analyzer display mode
@) DEMO(Demonstration) mode
Graphic equalizer display mode
Shows how each frequency range is compensated.
The graphic equalizer display also appears for about 5 seconds, even
while the unit is in the spectrum analyzer display mode, when one of
the following operation is performed.
1. Switching power ON.
2. An operation key associated with an equalizer operation is pressed.
SOI SOS TESS
Spectrum analyzer display mode
Displays the frequency distribution of the source being played to allow
under standing at a glance. ;
The peak value of the varying level of each frequency range is held and
displayed for about 0.5 second.
Peak hold level
After "DEMO" is displayed, the demonstration of the graphic equalizer
curves starts.