Cables And Modules - Nvidia ConnectX-5 User Manual

Internal Lock Bracket
4. Push the card until connectors are in a full mate.
Internal Lock Bracket
5. Secure the card.
Internal Lock Bracket
A clicking sound is
the connectors are in a full
mate.
To uninstall the adapter card,

Cables and Modules

Cable Installation
1. All cables can be inserted or removed with the unit powered on.
2. To insert a cable, press the connector into the port receptacle until the connector is firmly
seated.
a. Support the weight of the cable before connecting the cable to the adapter card. Do
this by using a cable holder or tying the cable to the rack.
b. Determine the correct orientation of the connector to the card before inserting the
connector. Do not try and insert the connector upside down. This may damage the
adapter card.
c. Insert the connector into the adapter card. Be careful to insert the connector straight
into the cage. Do not apply any torque, up or down, to the connector cage in the
adapter card.
Pull-tab (Thumbscrew) Bracket
Pull-tab (Thumbscrew) Bracket
Pull-tab (Thumbscrew)
heard once Turn the captive screw clockwise
until firmly locked.
see Uninstalling the
Bracket
Close the ejector.
Card.
Ejector-Latch Bracket
Ejector-Latch Bracket
Ejector-Latch Bracket
21