Receiver Operation; Using The Moco Contro - Radio Shack DX-394 Owner's Manual

RECEIVER OPERATION
S
4. Tum VOLUME fully counterclockwise
and RF GAIN fully clockwise before
you turn on the racsivar.
2. Solect the operation mode —
STANDBY, AM, LSB, USB, CW1, or CW2
(ses "Using the Mode Contror).
5. Pr
Note: If the clock display is flashing,
set the time (see "Setting the Clocks?)
4. Press BAND until the desired band
(EM, ми, or BW) appears on the dis-
play (see "Selecting the Banc").
5. Tune to the desired station (seo "Tu-
ning to a Station')
5, Adjust VOLUME as desired.
7. Pross POWER again to turn off the
receiver,
USING THE MODE CONTROL
Tho MODE switch seting cetermines tho
'ype of signal that your recaivar raceives.
For standard broadcast and international
'use the AM postion.
Гог тое code, uso Ст cr Сма. For
388 signals, use the LSB or USB position.
то help you decido whether to use USB
(upper sideband) or LSB (lower sidebanc),
oo tho following chart.
$s POWER to turn on the receiver.
'This chart shows the normal sideband
mode used for the Ham bands.
4
(When receiving SSB on other bands, try.
both USB and LSB until you are abla o
identity the signal.)
| m [m
Notes: