Kawai CN470 Owner's Manual page 42

f-
Th
(1) 3. Sounp SELEcT Buttons
CLASSIC MODERN ELECTRIC CHURCH = HARPSI- VIBRA- CHOIR /
GRAND PIANO PIANO) DRAWBAR ORGAN CHORD PHONE STRING PAD
C3)COCI CIC) COCCI OD
songi1 — 2 —— 3 — 4 — 5 pat! — 2
SELECTING A SOUND
These buttons are used to select the desired instrument to play.
Press the appropriate button and the LED indicator of it will be turned
on to indicate that it is selected.
The Sound Select buttons have two sounds assigned to them. Repeatedly
pressing these Sound Select buttons switches between the two sounds.
When you select the variation sounds, the dots in the LED display will
light up.
DUAL
You can layer any two preset sounds (Dual).
Pressing two buttons simultaneously will activate the DUAL mode.
If you want to layer the two sounds that are assigned to the same SOUND
SELECT button, hold down the SOUND SELECT button and press
either of the VALUE buttons.
SELECTING A SONG OR A PART
The built in recorder has the capability to record and play back up to five
different songs. Each song has two separate tracks (called "Parts") that
can be recorded or played back. The sound select buttons, except
HARPSICHORD and VIBRAPHONE, are also used for selecting a song
and a part when using the recorder.
Select the desired SONG number or PART number by pressing the
appropriate button while holding down REC or PLAY button.
SELECTING A FUNCTION
These buttons are used to select the functions that control the tuning
system and MIDI configurations.
Use one of the eight buttons (except CHOIR/PAD) to select a desired
function while holding down the TOUCH and TRANSPOSE button
simultaneously. (See Page 52)
42 KAWAI DIGITAL PIANO CN470