Kawai CN470 Owner's Manual page 19

Record the first part just the same as in the previous section and
press the PLAY/STOP button when you're finished recording.
Now select Part 2 by pressing the CHOIR/PAD button while holding
down the REC button. You will see the LED indicator for part 1 (STRING
button) is turned on and the indicator for part 2 (CHOIR/PAD button) is
flashing. This indicates that Part 1 has been recorded and Part 2 is ready
to record.
CHOIR /
STRING PAD
a
part! — 2
If you want to start recording the second part from the beginning of the
song, just play the keyboard. You will hear the first part playing back
while you record the second part.
If you would like to play back the first part and then start recording the
second part from a certain point later in the song, press the PLAY/STOP
button instead of playing the keyboard to start playback of the first part
and then begin recording the second part from any point you like.
ex
a
ic
aa
When you are finished recording, press the PLAY/STOP button
again.
Hold down the PLAY/STOP button and look at the Part buttons. The LED
indicators for both parts will be on, indicating that you have successfully
recorded two tracks. Press the PLAY/STOP button to listen to what you
have recorded. You should hear both parts.
Both parts will automatically be set to play back. If you do not hear both
parts playing, you may have made a mistake when recording.
If your song is not playing back properly, carefully reread the previous
section to make sure you're recording properly. You can use the LED
indicators (see Song Status and LED indicator section) to help determine
if you have a problem.
aa a a eee re
TUTORIAL: USING THE RECORDER 19