Before Use; Filling With Water - Rowenta GS4010U1 Manual

DESCRIPTION
1.
Steam head
2.
Eject button
3.
Steam hose connector
4.
Steam hose
5.
Carry handle
6.
Max water level
7.
Steam hose wrapping
8.
Steam head storage slide
9.a
Filling inlet
9.b
Emptying outlet
*depending on model: this is either equipment specific to certain models or
available as an optional accessory. Accessories that are not listed in this manual
or manufactured by other companies are not recommended for use with the Pro
Compact steamer.

Before use

Please read the instructions for use and Important Safeguards
carefully.
• Remove any packaging from the appliance.
• DO NOT PLUG IN OR TURN ON UNTIL ASSEMBLY IS
COMPLETE.

Filling with water

• Your steamer has been designed to operate using untreated tap water.
If your water is very hard (check with your local water
authority) mix tap water with store-bought bottled or
spring water in the following proportions:
-50% untreated tap water,
-50% distilled or demineralized water.
-or just use bottled spring water.
• Fill with maximum 33 ounces of water, taking care that
the water does not overflow or pass the fill line on the side of the tank.
Never overfill your steamer. Never fill it with hot water.
• Insert the steam hose into the hole on the
top of the unit while sliding out the eject
knob.
• Completely unwind the power cord.
10.
On / Off switch
11.
Electric cord storage
(under base)
12.
Upholstery brush*
13.
Fabric brush*
14.
Crease attachment*
15.
Lint pad*
16.
Door hook*
4