Panasonic PT-40LC12 Operating Instructions Manual page 30

I ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
I
The aspect mode changes each time the ASPECT
button is pressed.
A.
FULL
Notes:
• When a 480p signal is being received, the mode switches between
NORMAL, ZOOM, and FULL only.
• When a 1080i and 720p signal is being received, the mode is set to
FULL, and aspect switching is not possible.
• During PC input, the mode switches between NORMAL, TRUE and
FULL only.
_ NORMAL "_ FULL "_TRUE _]
• When XGA and Mac 19 signal is input, the aspect will be NORMAL
and FULL only.
_ NORMAL _ FULL _]
Notes:
• However, if the mode selected does not match the aspect ratio of the input signal, the original picture quality may be
affected.
• If using this Projection display in places, such as cafes or hotels, with the aim of displaying programs for a
commercial purpose or for public presentation, please note that by using the aspect ratio (16:9) selection function to
change the aspect ratio, you may be infringing on the rights of the original copyright owner of that program under
copyright protection laws.
• If a normal (4:3) picture is projected in wide screen, distortion may occur around the edges so that part of the picture
may no longer be visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be
seen.
3O