Panasonic PT-40LC12 Operating Instructions Manual page 28

I Projection display operation
Operation can be done from the projection
,_ display.
o
POWER button/
POWER indicator
Channel up / down buttons
Volume up(+) / down(-) buttons
Remote Control Sensor
I
©°
®
®
Or
® ® ®
@
4
Press to operate the projection
display with the remote control.
Press to turn the projection display on.
Press to select CABLE "rv
the desired
125 or 69
channel. (or use
number keys )
CH01
CH02
Note:
Refer to "Using
the number keys"
on the next page.
0H125 ]_
Press to
select the
desired
volume
level.
Notes:
• The channel number and volume level are stored even after the projection display is turned off.
• Power consumption can be reduced if the volume level is lowered.
28