Table of Contents
Advertisement
The surround modes allaw to enjoy the feeling of presence in music. Select the mode according to the source or components
"~
played. For the connections of the rear and/or center speakers, refer to "Connection of speakers".
.
=
DOLBY PRO LOGIC surround mode
Center speaker
In case center speaker
—-S
is not used
_
Video and LD software programs carrying the [1] [baer samncuna]
mark contain recording of the same Dolby Surround data as
those used in movie theaters.
The DOLBY
PRO LOGIC surround mode uses the Dolby
Surround data and brings into home a similar sound field
with full of presence to movie theater.
To use this mode, connect the rear {and center) speakers.
DOLBY 3 STEREO mode
If the left and right speakers are installed apart from each
other, the center acoustic image (words, etc.} may vary
depending on the Jistener's position. The DOLBY 3 STEREO
mode provides animproved positioning of the center acous-
tic image regardless of the listening position.
To use this mode, connect the center speaker.
es) +A)
THEATER LOGIC
This mode provides the atmosphere of a movie theater by
adding the reverberation component of movie theater to
the sound of the original music source. To use this mode,
connect both the rear and center speakers.
~ (P:5] ~ (FZ)
Additionally licensed under one or more of the following patents: U.S. numbers 3,959,590: Canadian numbers 1,004,603 and 1,037,877.
"DOLBY", "Pro Logic" and the double-D symbol IX] are trademarks of Dolby Laboratories Licensing Corporation,
SCN
PO CR
NN
I
ON
PS
RI
Advertisement
Table of Contents
