Sleep Timer Function Hearers; About The Help Function - Technics SA-AX910 Operating Instructions Manual

i
` Sleep timer function
4 '
The sleep timer is an excellent little feature that lets you fall asleep
with the radio on or while listening to another source. You can set
the timer to turn off after 30, 60 or 90 minutes. External sources are
turned off at the same time the receiver turns off provided their
power cords are plugged into the socket on the receiver.
(While listening to a source)
Press SLEEP and set how long (minutes) you want
the source to continue playing.
Each time the button is pressed, the indicator will change in
the order: 30 --60—--90--OFF
je)
The display returns to the way it was before in about 5 sec-
onds, and the "SLEEP" indicator will appear on the display.
To cancel the sleep timer
Press SLEEP until "OFF" is displayed. The "SLEEP" indicator will
go out.
To check how much time is left (while the timer is running).
Press SLEEP once.
Do not press SLEEP again before the remaining time indication
goes out.
If you do so, the timer will return to the setting mode.
Opera hs
To change the setting time (while the timer is running)
1. Press SLEEP
2. Press SLEEP again while the remaining time is displayed and
then reset the timer(30,60 or 90 minutes).
|
|
| About the HELP function .
If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function displays
information which can be useful for indicating the method by
which this condition can be remedied.
If "ERROR" or scrolling characters (for instance, "TAPE MONITOR
ON NOW") appears on the display during operation, carry out the
following operation.
Press -HELP.
(Touch only.)
The method for remedying this situation will be displayed.
For your reference
If the above button is pressed for 2 second or more until "RESET"
appears on the display, the operation settings for the unit will be
initialized to the settings made at the time of shipment.
However, any broadcasting stations which have been preset into
memory will not be erased at this time.