Technics SA-AX910 Operating Instructions Manual page 17

MEMORY
MANUAL-AUTO
QUARTZ LOCK! STEREO
\
Hi
i Listening to radio broadcasts
|_listening to radio broadcasts AA
Manual memory presetting PJ
The desired broadcast stations can be preset into the desired
channels by the user.
Set to the desired broadcast.
(See page 15.)
If interference or static is keeping you from enjoying an FM
broadcast, press FM AUTO/MONDO and change to monaural.
You can preset the memory in monaural just as in stereo.
Press MEMORY.
To cancel the memory function, press MEMORY again.
Press PRESET (V) or (A) to select the desired
channel.
Holding down the buttons lets you scroll through channels
faster.
Press MEMORY.
The channel will flash on the display.
To continue presetting
Repeat steps 1 through 4.
To listen to preset broadcast stations EJ
Press PRESET (V) or (A) to select the desired
channel.
Holding down the buttons lets you scroll through channels
faster.
To confirm the channel number of the broadcast station
being received
Press TUNER.
(The channel number will be displayed for approximately 1 second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference
Even if the power is switched to standby or the power cord is
disconnected from the household AC outlet, the memory will retain
its contents for approximately one month.
If frequency presettings are accidentally erased
Make the presettings once again.
The power cord should remain connected for one hour or more for
the memory back-up to be effective.
Opera HE