Commercial Maintenance Schedule; Compliances - True PLS0500 Owner's Manual

COMMERCIAL MAINTENANCE SCHEDULE

Commercial Maintenance Schedule
Inspect cables for wear, tension, and proper
connection if equipped. Replace at the fi rst sign of
wear.
Inspect cable length and cable end fi ttings.
Replace at the fi rst sign of wear.
Inspect all nuts and bolts and tighten if needed.
Inspect safety catches, stop rods, and their
fasteners. Replace at the fi rst sign of wear.
Inspect all anti-slip surfaces and replace as
needed.
Inspect all adjustment pins, weight stack pins,
set screws, gas shocks, snap links, and pulleys if
equipped.
Inspect all accessory bars and handles.
Inspect all safety and instructional decals.
Inspect all weight stack shields if equipped.
Clean guide rods and lubricate with a tefl on
lubricant if equipped.
Clean and condition upholstery.
Clean and polish frame.
Clean and polish chrome.
Lubricate pivot bearings and linear bearings.
Replace cables if equipped.

COMPLIANCES

This equipment complies with all applicable codes and regulations. For a complete list of compliances, please visit
www.truefi tness.com.
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
6 Months Annually
X
X
9