Table of Contents
Advertisement
[ GETTING STARTED
Tuning-in
positions will be skipped.
Menu displays will remain on screen
for approximately 15 seconds.
With the Set up Hie
v
AV
Setup
showing, press the
(or
¥)
Wane's
button to highlight Auto set.
—
Programme swap
Manual fine tuning
Prog. skip : off
MENU: return to Main menu
CALL: to exit
Press the * button to select
Auto set
the Auto set menu.
PREVIOUS SETTINGS
WILL BE LOST!
Press the STR button to start
EXIT FOR NO CHANGE
the automatic search.
ESTRESTART.
CALL:
to exit
Allow the television to
complete the search.
SEARCHING
Station: BBC2
Channel: 21
DO NOT PRESS ANY BUTTONS WHILST THE
AUTOMATIC SEARCH IS IN PROGRESS. If you make a
mistake simply repeat steps 1 and 2 to start again from
the beginning.
When the search is complete
Programme swap
the Programme swap
display will appear. The
television will display a list of
10 of the programme positions
allocated. Press the A (or W)
button to scroll through all the
signals found. (0-99)
To view a highlighted station
press the $ button. Press the
= button before moving on to
the next one.
Station
MENU: return to Set up
CALL: to exit
If no signal is found, the programme position will be
skipped.
To change a programme position
A
5
Press the A (or W) button to highlight the programme
you wish to move (swap). Press the + button to select it
(the channel will be displayed and the bar will highlight
the selection in red.)
Press the & (or W) button to move the bar (and the
chosen station) to the programme position desired. Press
the — button to store the new programme positions.
It is not necessary to tune your television to your video.
Simply connect the scart leads, insert a tape and press
play.
Advertisement
Table of Contents
