Steps
1. Align the screw hole of the radiator and fan assembly to the screw hole on the chassis and make sure that the spring latch is
locked.
NOTE:
Ensure that the hoses are facing the front of the computer.
2. Replace the two screws (M3x5) that secures the radiator and fan assembly to the chassis.
3. Connect the radiator and fan assembly cable to the system board.
4. Align the screw holes on the processor-cooling assembly with the screw holes on the system board.
5. In the sequential order, tighten the four captive screws that secure the processor-cooling assembly to the system board.
6. Connect the processor-cooling assembly cables to the system board.
Removing and installing components
65