Table of Contents
Advertisement
• If your network requires SSL encryption, tap the Use secure connection
(SSL) field to place a check mark in the box and activate this additional
level. Most often, this option should be enabled.
Important! If your Exchange server requires this feature, leaving this
field unchecked can prevent connection.
9. Consult your IT Administrator if it is necessary to enable the
Use client certification option.
10. With the new server information entered, tap Next.
11. Read the on-screen Activation disclaimer and, when prompted,
tap OK. The device then verifies your incoming server settings.
12. If prompted, read the Remote security administration
information and tap OK to accept the service and continue.
13. Adjust the various on-screen configuration fields and tap Next.
It may take a few seconds for the next screen to load.
• Enabling the Automatically download attachments when
Internal Use Only
connected to Wi-Fi option decreases the wait time to access large
email attachments.
14. If prompted, read the Activate device administrator? screen and
tap Activate to complete the email setup process.
Note: This process can take a few minutes. If the previous setup
screen re-appears, ignore it and do not alter any fields during
this process.
DRAFT
Messages
143
Advertisement
Table of Contents
