Installation of PI485 for 36k/42k/55k(PMNFP14A1)
• Fix PI485 to the bracket in the outdoor control box.(Figure 2)
• Connect PI485 to outdoor PCB and central controller with cable.(Figure 1,3)
- Connect CN-PWR to CN_CP(N) and CN_CP(L)
- Connect CN-OUT to CN_CENTRAL.
• Separate AC and DC line when connecting the cable to outdoor PCB
- Use the clamp at the bracket to fix connection from CN_OUT to CN_CENTRAL
• Tie the cables with the tie-wraps and clamps after intalling PI485.
• Refer to PI485 installation manual for detailed installation method
PI485
<Figure 1>
Clamp
<Figure 2>
ACCESSORY INSTALLATION GUIDE(PQDSB1)
CN_PWR(AC)
Centroller
controller
connector(DC)
CN_OUT(DC)
CN_
CENTRAL
DC Line
Screw
PI 485
Location
37
CN_CP(N)
CN_CP(L)
<Figure 3>