Dp Connector Cn5101 - HP OMEN 27s Maintenance And Service Manual

Table of Contents

Advertisement

DP connector CN5101

Repair the DP connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the DP connector from the circuit board.
4) Place the new component on the circuit board. Be sure that it matches the circuit board footprint.
5) Solder the new component.
21

Advertisement

Table of Contents
loading

Table of Contents