Lantronix G528 Quick Start Manual

G528 Quick Start Guide
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at www.lantronix.com/product-registration.
G528
Model shown: G528GP2FS
HARDWARE OVERVIEW
Front View
*Wi-Fi RS-232
USB
DC input
*Antenna selection will vary depending on your needs.
HARDWARE SETUP
1. Unbox and verify the contents. Gather the accessories that you will need.
2. Remove the SIM card from its packaging. Locate the SIM 1 slot on the unit.
To insert the SIM card, slide the latch for SIM 1 slot to the left and gently
push the SIM card (contact side down) all the way into the slot. Release the
latch.
Note: The SIM card is pre-activated by Lantronix, but the APN may need to be
configured in the software. See Quick Setup.
3. Attach the cellular / GNSS antennas to the antenna connectors and tighten
them securely.
4. Optional: To enable Last Gasp, slide the battery switch to the left (ON). The
battery is charged while the device is connected to an external power input.
5. Attach the Wi-Fi / Bluetooth antennas to the antenna connectors and tighten
them securely. If you're using only Bluetooth, attach one antenna to the Wi-
Fi / Bluetooth connector.
6. Attach the 3-pin plug on the power cord to the DC input on the unit. Connect
the AC plug on the power supply to a standard AC receptacle.
7. Observe that the Power LED is lit.
WHAT'S IN THE BOX
guides
Quick
Start
Guide
Insert
LEDs
Ethernet (LAN, WAN/LAN #2)
**RS-485
*Wi-Fi /Bluetooth
Reset
**I/O connectors
Accessory
5G + GNSS antenna
2.4/5.8GHz Wi-Fi/Bluetooth antenna
12VDC 12W Power supply (non-POE)* ACC-520-0165-00
SIM card
SIM
Power cord
For accessories, visit
microSD
*Cellular
diversity
**3-pin and 5-pin MICRO COMBICON plugs are sold separately.
Alert
User
Programmable 1
User
Programmable 2
Activity
Network
Signal
SIM
Wi-Fi
Power
1
IoT Cellular Gateway
Part number
ACC-930-0296-00
A21H0
N/A
ACC-500-0420-00
*POE power supply must be ordered separately.
https://www.lantronix.com/products/g520/
Back View
SIM 2
Last Gasp
*GNSS
LEDs
Red Device alerts
Blue Software configurable
Blue Software configurable
Amber Cellular data activity
Amber Cellular network status
Amber Cellular signal strength
Blue SIM in use
Blue Wi-Fi network status
Green Power On or Off
(See G520 Series User Guide for details.)
quantity
4-in-1
2
1
1
1
SIM 1
*Cellular
main