Table of Contents
Advertisement
OPTION B
UPPER PANEL:
1. Pull door open. Remove the two
screws (A) on each side of the
dishwasher door that secure the
upper panel assembly.
2. Close door while holding upper
panel in place. Pull out lower edge
of panel until top edge of panel
drops down.
3. Place panel on a smooth, flat
surface and remove three screws
(B) from either side of panel to re-
move the trim strip (C).
4. Slide the panel out. Handle care-
fully so the panel will not be
scratched or bent. Turn the panel to
the desired color. Place the color
panel in position then push the filler
panel in behind it.
5. Replace the trim strip and the
three screws.
6. With hands placed at sides of
panel, slide the top edge of the
panel up into position under the
control panel (see illustration to the
right).
7. Hold the panel in place and open
the door.
8. Hold panel in position with one
hand. Replace the two screws (A)
on each side of the dishwasher
door that secure the panel
assembly.
28
fuiittiiyfet ik Ti
Advertisement
Table of Contents
