Default Counter/Timer Pins - National Instruments 6368 User Manual

Chapter 7 Counters

Default Counter/Timer Pins

By default, NI-DAQmx routes the counter/timer inputs and outputs to the PFI pins.
Refer to Table 7-9 for the default NI-DAQmx counter/timer outputs for PCI Express,
PXI Express, USB Mass Termination, and USB BNC devices. Refer to Table 7-10 for the default
NI-DAQmx counter/timer outputs for USB Screw Terminal devices.
Note (NI USB BNC devices)
pin number does not apply
Table 7-9. X Series PCI Express/PXI Express/USB Mass Termination/USB BNC Device
Counter/Timer Signal
CTR 0 SRC
CTR 0 GATE
CTR 0 AUX
CTR 0 OUT
CTR 0 A
CTR 0 Z
CTR 0 B
CTR 1 SRC
CTR 1 GATE
CTR 1 AUX
CTR 1 OUT
CTR 1 A
CTR 1 Z
CTR 1 B
CTR 2 SRC
CTR 2 GATE
CTR 2 AUX
CTR 2 OUT
7-42 | ni.com
For NI USB BNC devices, the default connector 0
.
Default NI-DAQmx Counter/Timer Pins
Default Connector 0 Pin Number (Name)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
2 (PFI 12)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
40 (PFI 13)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
11 (PFI 0)
10 (PFI 1)
43 (PFI 2)
1 (PFI 14)