Bluetooth Operation - Emerson EPB-3004 User Manual

+10 control
Press the +10 button to advance the music search by increments of 10 tracks.
REPEAT MODE
Repeat 1
To repeat the current track, press the REPEAT/PROGRAM BUTTON once, the REPEAT
INDICATOR will show in LCD display. The track will continue to play until the repeat function is
turned off.
Repeat All
To repeat all the tracks, press the REPEAT BUTTON twice, the REPEAT ALL INDICATOR
will show on LCD display. All the tracks on the USB will be played repeatedly.
Random
Press the REPEAT BUTTON three times for random playback, RAND INDICATOR will show on
the LCD display.
To Cancel Repeat/Random Function: Press the REPEAT BUTTON until REPEAT/REPEAT
ALL/RAND indicator goes off from LCD display.
Programmed USB playback
This unit can be programmed to play up to 99 tracks/files in USB mode.
1. Plugged in your flash-drive into USB port, make sure unit is in stop mode.
2. Press REPEAT/PROGRAM button, the PROGRAM Indicator will light and program
Channel Number "P01" will show on the LCD DISPLAY.
3. Press or
blink on the LCD DISPLAY to prompt for input.
4. Press the PROGRAM button again to store selection. The Program Channel Number will
change to "P02".
5. You may repeat steps 2 - 3 to program as many as 99 tracks. When the memory full,
"FUL" will show on the LCD DISPLAY.
6. Press the PLAY/PAUSE
7. Press STOP
8. Press the
9. To cancel programmed play, press the STOP
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
1. Slide the FUNCTION switch to CD/USB/
Mode button, the Bluetooth indicator
2. The unit will start in auto connection mode and search for a previously paired device that
is active and in range (30 feet/10 meters). If found, a brief welcome melody will be heard
and Bluetooth indicator
switch to interactive pairing mode and the Bluetooth indicator
3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device
and enable the search or scan feature to find "Emerson EPB-3004" in the list of
discoverable Bluetooth devices. Select the "Emerson EPB-3004" from your available
device list when it appears on its screen and a brief welcome melody will be heard if
pairing and connection is successful. If you are asked for a password, enter "0000".
4. If no successful pairing and connection is made within 5 minutes, the unit can enter
manual pairing mode. You need to press and hold the PAIR button until Bluetooth
indicator flashes to initiate a pairing/connecting request to a new or old Bluetooth
enabled device. Follow step #3 to complete the process.
button to select the track to be programmed. The track number "001" will
button to start the programmed play.
button once to stop playback.
button to resume programmed play.

BLUETOOTH OPERATION

will change to solid on. If no active device is found, the unit will
button twice.
position, press and hold the CD/USB/
will flash.
10
keeps flashing.