Table of Contents
Advertisement
vo-l
Using the VCR
Number keys
VCR
This illustration shows the
Rents
C ed,
1b
c ia
=/ig
COMPACT
COMPONENT
SYSTEM
EX. TOSS
PDSSR.
The Remote Control
mae
for CA-TDS5 does not have
=
the RDS CONTROL button
'
or include any RDS related
ory
labels.
Coes fon am)
*
This illustration 1s of CA-TDS55R, CA-TDS
does not have the DISPLAY MODE. EON ON/
VCR button and VCR CONTROL button
EE SEO) ARO and Tacs
Ree
Press the VCR or VCR CONTROL button to
Suons:
switch the Remote Control to VCR contro] mode.
You can then use the { hae <)>
pee >.
gaYV.e»
A
and REC PAUSE buttons to control
the VCR,
Operating a JVC VCR
The Remote Control supplied with System can control JVC VCRs.
When operating a VCR, aim the Remote Control at the remote sensor on the VCR.
Set the remote code of the VCR to A.
You can use the buttons on the Remote Control to operate the following functions.
VOR?
fe Sietodttcon Sets the System's source to VCR and switches the Remote Control to
VCR Control mode.
VCR CONTROL.
........... Sets the Remote Control to VCR Control mode but does not set the source
to VCR.
BON,
aieaiieieeNae Plays back a video tape.
La,
Server
ter ees aiid 2! Stops plavback.
Kod
Rewinds a video tape.
call ant IP EEE
TEE Fast-forwards a video tape.
Number keys ......0...0..00: Selects the VCR channel.
To select a 2 digit number. press tenth digit first, then unit digit. The 10
butten corresponds to Q.
@
Example : For channel 10. press 1. then 10. For channel 25. press 2,
then 5.
REC PAUSE
................ Sets the VCR to record standby mode.
Listening to a JVC VCR
By playing the sound from VCR through the System, you can gain control over how the music or program
sounds. Once the connected equipment is playing through the System, you can apply the sound effects.
WH First make sure that the optional equipment is properly connected to the System. (See page 7).
fe
. Set the VOLUME
control to 0.
aes]
-@
Press the VCR button.
| ve
|
The VCR button indicator lights up.
=
ae
as
When you press the VCR button on the Remote Control , sets the System's
a
ee
source to VCR and switches the Remote Control to VCR Control mode.
ae
When System 1s in Standby mode. the Unit is automatically turned on and "VCR" appears on the
display.
42
» Press the » A button on the Remote Control.
-Adjust the VOLUME
control to the desired listening level.
}. Select a sound effect mode, if you wish.
To stop playing, press the @ " button.
To Cancel the Setting
Change the source by starting any one of the System's built-in sound sources, such as the Tuner or CD
Player.
Recording of a JVC VCR
'Prepare the VCR for recording.
Turn the power on and insert a tape to be recorded.
2, Press the VCR CONTROL
button to set the Remote
Control to VCR
mode.
'Select a desired channel by using the number keys.
Press the REC PAUSE button.
The VCR is set to standby made.
Press the » 4 button.
The VCR starts recording.
To stop the recording, press the
MY button.
To pause the recording, press the REC PAUSE button. To resume the recording. press the ® A
button again.
Operating a VCR other than JVC's VCR
Listening to a VCR
Press the VCR button to select a VCR as the source. Then, play the VCR connected to the system
according to ifs instruction manual,
You can adjust VOLUME control to the desired listening level and apply the sound effects on the sound
from the
VCR.
Recording to a VCR
To record to a VCR, start playback of the recording source of the System and start recording on your
VCR. (Refer to the VCR's instruction manual for details on the recording procedure for your VCR.)
MB You cannot record using Sound mode effects.
43
YSSGC
Advertisement
Table of Contents
