Table of Contents
Advertisement
I
CONNECTIONS
I
Connection
to a TV
(S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable inot mcluaea), connect the S-VIDEO
OUT terminal on the rear of the DVD player to me
S-VIDEO IN terminal of your TV
Using Lheaudio cables, connect the AUDIO (red and white]
OUT terminals on the rear of the DVD player to the AUDIO (red
and white] IN terminals of your TV.
Turn on the DVD player and TV.
3
Press [ne nDutselector on your TV remote control until the S-
Video signal from the DVD player appears on your TV screen.
4
Set the Video Output to Progessive Out Off in the Display
Setup menu. (See pages 52 to 54!
You can use the VIDEO SEL. button to change the Video
OutPut mode. (See uage 12'
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- Please do not connect S-Video and Component Video (Y, Pb, Pr) output simultaneously, as they may
interfere and degrade both video output quality.
ENG-13
Advertisement
Table of Contents
