Jslow1: Slow Mode Booting Jumper; Jaud1: Front Audio Connector - MSI X299 GAMING M7 ACK Quick Start Manual

You can also control the GAME BOOST function in BIOS Setup or with MSI COMMAND
y
CENTER software.
In order to optimize performance and improve system stability, when you activate the
y
GAME BOOST function, please leave the settings in the BIOS > OC menu unchanged.
The success of overclocking depends on the components of your computer.
y
We do not guarantee the GAME BOOST overclocking range or the damages/ risks
y
caused by overclocking behavior.
MSI components are recommended for better compatibility when using GAME
y
BOOST function.

JSLOW1: Slow Mode Booting Jumper

This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
Important
Users will try extreme low temperature overclocking at their own risks. The
y
overclocking results will vary according to the CPU version.
Please don' t switch to Enabled when power-off or the system will be un-bootable.
y

JAUD1: Front Audio Connector

This connector allows you to connect audio jacks on the front panel.
Normal
(default)
Red LED indicates that the
Slow Mode is enabled.
1 MIC L
3 MIC R
5 Head Phone R
7 SENSE_SEND
9 Head Phone L
Enabled
(Please enable this
jumper during BIOS
POST.)
2 10
1 9
2 Ground
4 NC
6 MIC Detection
8 No Pin
10 Head Phone Detection
Overview of Components
27