Sony TRINITRON KV-25FX30B Service Manual page 7

introducing and Using the Menu System
@ Your TV uses an on-screen menu system to guide you through the operations. Use the
@ following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on. MENU
2 + To highlight the desired menu or o tion, press W or #.
Bhlg P' P
* To enter to the selected menu or option, press >.
* To return to the last menu or option, press ¢.
* To alter settings of your selected option, press W / # / € or >.
* To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen. MENU
Menu Guide
Level 1 Level 2 Level 3 / Function
PICTURE ADJUSTMENT
Med. The "Picture Adjustment" menu allows you to
Cekure alter the picture adjustments.
Sharpness
Hk
= To do that: after selecting the item you want to
alter press , then press repeatedly W / 4 /
€ or } to adjust it and finally press OK to
store the new adjustment.
This menu also allows you to customise the
picture mode based on the programme you are
watching:
® Personal (for individual settings).
© Live (for live broadcast programmes).
Ww Movie (for films).
* Brightness, Colour and Sharpness can only be alterated if 'Personal" mode is selected.
© Hue is only available for NTSC colour signal (e.g: USA video tapes).
* Select Reset and press OK fo reset the picture to the factory preset levels.
a eee
continued...
Level 2 Level 3 / Function
SOUND ADJUSTMENT
The "Sound Adjustment" menu allows you to
alter the sound adjustments.
To do that: after selecting the item you want to
alter, press. then press repeatedly Ww /
4 / €or >to adjust it and finally press OK
to store the new adjustment.
= | Personal
Treoke
Base
Balance
Hr
eset
Dusl Sound: Mono
Detail Adjustment
This menu also contains two submenus as following:
Mode > = Personal (for individual settings)
w Rock
wv Pop
w Jazz
Detail Adjustment ® WW Sound Effect: wW Off: Normal.
Spatial: Acoustic sound effect.
W Auto volume: wW Off: Volume channel changes according
to the broadcast signal.
vy On: Volume level of the channels will
stay the same, independent of the
broadcast signal (e.g. in the case of
advertisements).
w TV Speakers: W Off: Sound from external amplifier
connected to the audio outputs on
the rear of the TV set.
v On: Sound from the TV set.
© Treble and Bass can only be altered if "Personal" mode is selected.
* Select Reset and press OK to reset the sound to the factory preset levels.
* Incase of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel
2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono.
OO
continued...
10 | Menu System