Advertisement
Recommended Startup Image Dimensions
For the best fit for the startup images, use an image that has the
following dimensions, in pixels.
Display resolution
WVGA
WSVGA
WXGA
HD
WUXGA
Home Page Customization
Customizing the Home Page
1
From the RV Builder Settings, select Customize Home
Page > Edit Home Page > Add Item.
2
Select an item:
• To add a button to open a page, select Page Button.
• To add a switch, select Switch.
• To add a gauge, select Gauge.
• To add an overlay bar, select Overlay Bar.
3
Select an option to edit an item:
• To move an item, drag it to the new location.
• To layer the item in front of another item, select Move to
Front.
• To layer the item behind another item, select Move to
Back.
• To change the page the button opens, select Replace
Layout, and select the page to open.
• To change the item a switch controls, select Replace
Switch, and select the item.
• To change the data shown in a gauge, select Replace
Data, and select the data.
• To change the data shown in an overlay bar, select
Replace Overlay Bar, and select the bar.
• To remove the item, select Remove.
4
Select Home to view your custom home page.
Customizing the Home Page Background
You can customize the background image. For the best fit, the
image should be 50 MB or less, should not have transparency,
and should conform to the recommended dimensions
(Recommended Background Image Dimensions, page
1
Insert a memory card that contains the image you want to
use.
2
From the RV Builder Settings, select Customize Home
Page > Edit Home Page > Background > Select Image.
3
Select the memory card slot.
4
Select the image.
Recommended Background Image Dimensions
For the best fit for the background image, use an image that has
the following dimensions, in pixels.
Display resolution
WVGA
WSVGA
WXGA
HD
WUXGA
Adding and Editing a Digital Switching Page
You can add and customize digital switching pages for some
compatible digital switching systems.
4
Image width
Image height
680
200
880
270
1080
350
1240
450
1700
650
Image width
Image height
800
430
1024
535
1380
723
1920
991
1920
1111
1
Select Switching > Menu.
2
Set up the page as needed:
• To enter a name for the page, select Name.
• To set up the switches, select Edit Switches.
Troubleshooting
My device will not turn on or keeps turning off
Devices erratically turning off or not turning on could indicate an
issue with the power supplied to the device. Check these items
to attempt to troubleshoot the cause of the power issue.
• Make sure the power source is generating power.
You can check this several ways. For example, you can
check whether other devices powered by the source are
functioning.
• Check the fuse in the power cable.
The fuse should be located in a holder that is part of the red
wire of the power cable. Check that the proper size fuse is
installed. Refer to the label on the cable or the installation
instructions for the exact fuse size needed. Check the fuse to
make sure there is still a connection inside of the fuse. You
can test the fuse using a multimeter. If the fuse is good, the
multimeter reads 0 ohm.
• Check to make sure the device is receiving at least 12 V.
To check the voltage, measure the female power and ground
sockets of the power cable for DC voltage. If the voltage is
less than 12 V, the device will not turn on.
• If the device is receiving enough power but does not turn on,
contact Garmin product support.
Specifications
All Models
Specification
Temperature range
Input voltage
Fuse
NMEA 2000 LEN @ 9 Vdc
NMEA 2000 draw
Memory card
Wireless frequency
Seven-inch Models
4).
Specification
Dimensions (W × H × D)
Display size (W × H)
Weight
Max. power usage at 10 Vdc
Typical current draw at 12 Vdc 1.5 A
Max. current draw at 12 Vdc
Nine-inch Models
Specification
Dimensions (W × H × D)
Display size (W × H)
Weight
Max. power usage at 10 Vdc
Typical current draw at 12 Vdc 1.3 A
Max. current draw at 12 Vdc
© 2019 Garmin Ltd. or its subsidiaries
Measurement
From -15° to 55°C (from 5° to 131°F)
From 10 to 32 Vdc
6 A, 125 V fast-acting
2
75 mA max.
2 SD
card slots; 32 GB max. card size
®
2.4 GHz @ 17.6 dBm
Measurement
13
224 × 142.5 × 53.9 mm (8
1
× 2
/
in.)
8
154 × 86 mm (6.1 × 3.4 in.)
0.86 kg (1.9 lb.)
24 W
2.0 A
Measurement
256.4 × 162.3 × 52.5 mm (10
1
× 2
/
in.)
16
197 × 114 mm (7.74 × 4.49 in.)
1.14 kg (2.5 lb.)
27 W
2.3 A
5
/
× 5
/
16
8
1
3
/
× 6
/
8
8
Advertisement
