Table of Contents
Advertisement
TRENDnet User's Guide
Enable - enables PTP port in domain as acceptable master.
Acceptable
Master Priority
Disable - deletes PTP port in domain from acceptable master list.
Port Settings
System > PTP > Port Settings
Parameter
Description
Domain ID
Port
Enable - enables PTP port in domain as acceptable master.
Acceptable
Master
Disable - deletes PTP port in domain from acceptable master list.
Add - configures synchronization interval of PTP port as specified
value.
Sync Interval
Default - deletes existing synchronization interval from PTP port
and adds default value (0).
© Copyright 2023 TRENDnet. All Rights Reserved.
Add - configures to send periodical announce messages in
specified intervals in PTP port.
Announce
Interval
Default - deletes existing announce interval from PTP port and
adds default interval (1).
Add - configures specified value as announce time in PTP port.
Announce
Default - deletes existing announce timeout from PTP port and
Timeout
adds default timeout (3).
Add - configures specified VLAN list to PTP port.
VLAN ID
Remove - deletes specified VLAN list from PTP port.
Auto Provision
Auto provision is a service that service provider can quickly, easily and automatically
configure remote device or doing firmware upgrade at remote side.
1. When the Auto Provision is enabled, the Switch will download the auto provision
information file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example:
SWITCH_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=8648P-999-1.1.0.S0
Firmware_Image_File=8648P-999-1.1.0.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=8648P-999-1.1.0.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
TI-BG62i
44
Advertisement
Table of Contents
