Specifications - Toshiba MEA110 Owner's Manual

Others

Specifications

Power supply
Mass
Dimensions
Recording system
Recording media
Maximum recording time
Playback duration
Operating conditions
I/F connector
Headphone jack
Signal-to-noise ratio
• The design and specifications are subject to change without notice.
40
AAA size battery (2)
Approx. 53g (75g including the supplied batteries)
97 mm × 12.5 mm × 50 mm (W/H/D)
(97 mm × 12.5 mm × 72 mm with the supplied battery
housing attached) (except projecting parts)
SD audio V1.0
CODEC:
MPEG- 2 AAC (low complexity profile) / ADTS stream
MPEG Audio Layer 3 (MP3)
Sampling frequency: 16 kHz to 48 kHz
Bit rate: 16 kbps to 192 kbps
Internal flash memory (approx. 64 MB), SD memory
card
Internal flash memory:
Approx. 60 minutes (bit rate 128 kbps)
Approx. 80 minutes (bit rate 96 kbps)
Approx. 120 minutes ((bit rate 64 kbps)
Main unit Battery housing
Alkaline not loaded
Nickel-Metal
Hydride
rechargeable not loaded
Alkaline Alkaline
Nickel-Metal
Hydride
rechargeable Alkaline
(Measured at 25°C, bit rate 128 kbps, with alkaline
batteries TOSHIBA LR03G R, nickel-metal hydride
rechargeable batteries TOSHIBA TH-4G)
Temperature: 5˚C to 35˚C, Humidity: 30% to 80% (RH)
(no moisture condensation)
USB interface
(Required power from a connected device: 400mA)
3.5mm stereo mini jack, impedance 32 Ω
More than 85 dB
Duration
Approx. 5 hours
Approx. 4 hours
Approx. 12 hours
Approx. 10 hours