Advertisement
3 | Install Wall Toggle Anchors
Use proper drill bit to create holes where pilot holes were made for wall
anchors. Install toggle anchors.
IMPORTANT NOTICE
Due to many varied building construction environments, Customer and Installer are responsible for procuring and
using appropriate fasteners/anchors for mounting storage products to wall. Product uses 8 fastening points to wall.
Combined load capacity of fasteners should be GREATER THAN 200lbs. Correct fasteners will depend on wall
construction of mounting location. Contact Juniper Office with any questions.
.
4 | Secure Wall-Mount Wood Brace
Place wall-mount wood brace back on wall, aligning holes with installed
toggle anchors. Make sure flanges are sitting aganist wall instead of
facing out. Attach brace using provided bolts to lock in place.
Watch Step
Make sure toggle anchors
are correctly oriented in
wall, as shown.
Watch Step
Scan to
Scan to
4
Advertisement
