Advertisement
1 | Determine Mounting Location
Measure for hutch placement on wall and mark area. Find at least
two studs for additional optional support (step 5) and mark locations.
Note: If mounting hutch near a corner and do not want it corner flush,
place wall-mount wood brace on wall to determine distance from side
wall and mark location.
2 | Prep for Wall-Mount Wood Brace
For proper mounting support, make sure wood brace hole flanges
are sitting against wall instead of facing out. Place wall-mount wood
brace on desired area of wall and level. Once leveled, use a small
enough drill bit to make pilot holes for wall anchors through wood
brace holes shown by numbers in image below. Remove wood brace
from wall.
3
1
2
x"
Wall-Mount Wood Brace
3
5
4
6
Scan to
Watch Step
x"
Scan to
Watch Step
7
8
Advertisement
