Advertisement
Quick Links
Advertisement
Summary of Contents for Juniper BSDH-3
- Page 1 BSDH-3 Overhead Storage Watch Entire Install Video General Installation Guide...
-
Page 3: Parts List
Customer and Installer are responsible for procuring and using appropriate fasteners/anchors for mounting storage products to wall. Product uses 8 fastening points to wall. Combined load capacity of fasteners should be GREATER THAN 200lbs. Correct fasteners will depend on wall construction of mounting location. Contact Juniper Office with any questions. -
Page 4: Determine Mounting Location
1 | Determine Mounting Location Measure for hutch placement on wall and mark area. Find at least two studs for additional optional support (step 5) and mark locations. Scan to Watch Step Note: If mounting hutch near a corner and do not want it corner flush, place wall-mount wood brace on wall to determine distance from side wall and mark location. - Page 5 Product uses 8 fastening points to wall. Combined load capacity of fasteners should be GREATER THAN 200lbs. Correct fasteners will depend on wall construction of mounting location. Contact Juniper Office with any questions. 4 | Secure Wall-Mount Wood Brace Place wall-mount wood brace back on wall, aligning holes with installed toggle anchors.
- Page 6 5 | (Optional) Recommended for Extra Support Aligning with marked studs, create two pilot holes in wood brace using a countersink drill bit. Secure two wood screws to add Scan to Watch Step extra support. 6 | Secure Handle Hardware Using provided hardware, secure handles to doors.
- Page 7 7 | Attach Hutch to Wood Brace With additional assistance, align holes on hutch with holes on wall-mount wood brace. Using provided bolts, attach hutch to wall-mount wood brace. Scan to Watch Step Secure tightly. Hutch Holes Wall...
- Page 8 1-866-999-0955 | hello@juniperoffice.com | juniperoffice.com © 2023 Juniper Office | Version 23.1.0...