Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
Description
No parts required
Lynch pin
Link pin
Lynch pin
Bolt (1/2 x 3 inches)
Nut (1/2 inch)
Short driveshaft, Part No. 115-2839
(may be needed; sold separately)
No parts required
No parts required
No parts required
No parts required
Turf guards (not included)
CE Compliance Kit, Part No. 110-4693
(not included)
Lynch pin (ProCore 864)
Lynch pin (ProCore 1298)
Qty.
–
Inspect the machine.
2
Connect the lower link arms.
1
Connect the upper link.
1
1
1
Connect the PTO shaft.
–
–
Adjust the sway links.
–
Level the aerator side-to-side.
–
Adjust the roller scraper.
–
Install the tine heads and the tines.
–
Install the turf guards.
Secure the hood latches (required for
1
CE only).
4
Remove the storage stands.
8
8
Use
Advertisement
Table of Contents
