Panasonic NA-F150A5 Operating & Installation Instructions Manual page 27

Water supply
valve screw
Water tap
COLD
adaptor
HOT
Water supply
hose
5. Connect the power plug
and grounding.
 Ask a service person to do the
grounding work.
 In case of a 2-pin power cord,
establish a ground.
COLD HOT
6. Check that the washing
machine is level.
The bubble should be at the centre
of the mark.
Leveller
1 Turn the adjustable leg knob
Power plug
2 Turn the adjustable leg to
7. Perform a trial operation.
 Check that there is no water
leakage, abnormal sounds or error
display.
Mark
Bubble
 If the bubble is out of
the mark
to the left to loosen.
3 Turn to the right to
tighten.
To raise To lower
eliminate wobble.
27