Panasonic NA-F150A5 Operating & Installation Instructions Manual page 26

Installation
4. Connect the water tap adaptor and water supply hose.
1
Connect the water tap adaptor
to the water faucet.
1 Turn part A to the left until
approx. 4 mm of the thread
becomes visible.
2 Loosen the 4 screws.
3 Connect to the faucet and
tighten the screws.
4 Turn part A to the right and
tighten securely. (To prevent
water leakage)
2
Connect the water supply hose
to the water tap adaptor.
Insert the hose into the adaptor
while pushing down the lever, and
hook the claw of the lever on the
flange of the adaptor.
3
Connect the water supply hose
to the water supply valve screw.
1 Hold the elbow and tighten
the nut.
2 Check that the elbow is not
loose.
26
(continued)
Water faucet
Water
tap adaptor
Water
supply hose
CAUTION
 Do not make wrong connection for
the HOT and COLD water supply
faucets.
 Tighten the nut firmly.
 Do not twist, squash, modify or cut
the hose.
Screw
Thread
Claw
Lever
Nut
Water supply
hose
Water supply
valve screw
Part A
Flange
Elbow