Table of Contents
Advertisement
Washing
Preparation:
Check if the washing machine is properly installed.
Turn on the water faucet.
When using Temp Setting, turn on both hot and cold water faucets.
1
The "Normal" program is
selected when the power is
turned on.
2
Select a program.
Temp Setting
Timer preset
3
The pulsator moves without
water and measures the
amount of laundry
(approx. 5 seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
To check the water amount
→ Press "Water Level".
14
Timer preset
After loading laundry
Turn the power on.
(P. 10)
Start.
(P. 24)
3
2
Temp Setting
Press to select Hot/Warm/
Cold for washing.
Hot ← Warm ← Cold
Set how many hours later
to finish operation.
2 minutes after start, all
indications except
To confirm after the timer has
been set, press
To cancel or change, press
.
The hours that can be set differ
depending on the program.
1
(P. 9)
(P. 8)
turn off.
.
Advertisement
Table of Contents
