ASROCK H510M-HDV R2.0 User Manual page 28

Serial ATA3 Connectors
Right Angle:
(SATA3_3:
see p.6, 7, No. 8) (Upper)
(SATA3_2:
see p.6, 7, No. 8) (Lower)
Vertical:
(SATA3_0:
see p.6, 7, No. 10)
(SATA3_1:
see p.6, 7, No. 9)
USB 2.0 Header
(9-pin USB_5_6)
(see p.6, 7, No. 7)
USB 3.2 Gen1 Header
(19-pin USB3_3_4)
(see p.6, 7, No. 6)
Front Panel Audio Header
(9-pin HD_AUDIO1)
PRESENCE#
(see p.6, 7, No. 15)
MIC_RET
OUT_RET
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
IntA_PB_D-
GND
IntA_PA_D- IntA_PB_D+
IntA_PA_D+
Dummy
1
GN D OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is one USB2.0
header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
This header is for
connecting audio devices
to the front audio panel.
H510M-HDV R2.0
H510M-HVS R2.0
21