Table of Contents
Advertisement
You can operate the touch panel using the following methods:
To select an icon on the touch panel, you may highlight it using the Direction button
[
/
/
/
] and then press the Enter button.
e.g.
<LCD monitor>
Select one
Notes
• The icons other than [
• Operating the touch panel with the supplied stylus will reduce operation errors while it can
be operated with the finger.
• Dragging too quickly may cause the panel to give no response.
Setting up the touch panel
If the touch panel does not correctly respond according to tapped positions, use the
touch panel setup function in the Setup menu. For the detailed procedures, see
"Changing the System Settings"
Tapping:
Tap an icon or other items on the touch panel for a short
moment. Perform this operation to select an icon or a
message, for example.
Tapping and holding:
Tap and hold an icon or other items on the touch panel.
Perform this operation to change the brightness of the
LCD monitor, for example.
Dragging:
Tap and then move in any direction on the panel. Perform
this operation to move a slider, for example.
Total0008
Upper-arrow icon
Lower-arrow icon
Right-arrow icon
Left-arrow icon
], [
], and [
] differ depending on the current status.
page 63.
<Direction button
on the camera>
T
W
17
Advertisement
Table of Contents
