Using the USB Cable (Windows 98/2000/ME) (continued)
Set the mode dial to [
].
The "Add New Hardware Wizard" screen appears.
Perform the following operation with Windows 98/2000/ME already booted up.
If this is the first time for an image to be imported using the USB cable, the Add New Hardware Wizard
screen appears.
Close wizard screen, then install the USB driver.
Installing the USB driver
P.11
Start up Image Expert.
Click [Start] - [Program] - [Image Expert] on the Windows task bar.
- 13 -
10-23 PDRM11soft-E
13
01.6.28, 3:46 PM