Zanussi ZWF942F1DG User Manual

Hide thumbs Also See for ZWF942F1DG:

Advertisement

Quick Links

User Manual
GETTING
STARTED?
EASY.
ZWF942F1DG
EN User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWF942F1DG

  • Page 1 User Manual GETTING STARTED? EASY. ZWF942F1DG EN User Manual Washing Machine...
  • Page 2: Safety Information

    VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
  • Page 3: General Safety

    GENERAL SAFETY This appliance is for washing domestic-type, machine-washable • laundry only. This appliance is designed for single household domestic use • in an indoor environment. This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS INSTALLATION • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains The installation must comply with cable need to be replaced, this must be carried relevant national regulations. out by our Authorised Service Centre. •...
  • Page 5: Product Description

    • Do not touch the glass door while a programme professional repairers, and that not all spare operates. The glass can get hot. parts are relevant for all models. • Make sure that all metal objects are removed • Concerning the lamp(s) inside this product and from the laundry.
  • Page 6: Technical Data

    Control panel Inlet hose connection Door handle Mains cable Rating plate Transit bolts Feet for levelling the appliance Hose support Drain hose The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D). Mod.
  • Page 7: Information For Installation

    UNPACKING WARNING! It is possible to see water flowing from the drain hose. 1. Open the door. Remove all the items from the This is because the washing drum. machine has been tested at the factory. 4. Remove the three transit bolts and pull out the plastic spacers.
  • Page 8 CAUTION! Make sure there is no You can extend the drain hose to damage to hoses and there are no maximum 400 cm. Contact the leaks from the couplings. Do not use authorised service centre for the other an extension hose if the inlet hose is drain hose and the extension.
  • Page 9: Installation On Suspended Flooring

    ø16 W011 Connect the drain hose to the spigot and tighten it with a clamp. Make sure that the drain hose makes 3. To a stand pipe with vent hole - Insert the drain a loop to prevent particles going into the appliance hose directly into a drain pipe.
  • Page 10: Stacking Kit

    FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory.
  • Page 11: Control Panel Description

    CONTROL PANEL DESCRIPTION Programme dial Spin reduction options touch button Display • No Spin option Delay Start touch button • Rinse Hold option FlexiTime touch button • Night option Temp. touch button Start/Pause touch button ON/OFF push button Easy Iron touch button Extra Rinse touch button Prewash touch button DISPLAY...
  • Page 12: Dial And Buttons

    Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. FlexiTime bars level indicator. Drum clean indicator. Child safety lock indicator. Add garments indicator.
  • Page 13: Permanent Extra Rinse

    regularly to reduce creasing. You must drain the Touch the button repeatedly to set the required water to unlock the door. delay. The time increases in steps of 1 hour up to As the programme is very quiet, it is suitable for 20 hours.
  • Page 14: Programme Chart

    PROGRAMMES PROGRAMME CHART Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range Eco 40-60 1400 rpm 9 kg White cotton and fast-coloured cotton. (1400- 800 Normally soiled items. The energy consump- 40 °C rpm) tion decreases and the time of the washing...
  • Page 15 Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range 1400 rpm 9 kg White cotton items. This programme removes CleanBoost (1400- 800 micro-organisms thanks to a washing phase 60 °C rpm) with the temperature maintained above 60°C...
  • Page 16 Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ Wool ■ ■ ■ ■ ■ ■ ■ Denim ■...
  • Page 17: Acoustic Signals

    Liquid for col- Delicates Programme Liquid Universal Special Universal powder oureds woollens ▲ ▲ 14min Refresh ▲ ▲ 30min Rapid ▲ ▲ ▲ 60min EasyWash 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended SETTINGS ACOUSTIC SIGNALS...
  • Page 18 3. Put the laundry in the drum, one item at a time. CAUTION! Make sure that no laundry Do not put too much laundry in the drum. gets caught between the seal and the 4. Close the door firmly. door to avoid risk of water leakage and damage to the laundry.
  • Page 19: Starting A Programme With The Delay Start

    STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. programme dial on a wrong position). The related indicator stops flashing and stays on. The programme starts, the door is locked.
  • Page 20 CANCELLING A RUNNING PROGRAMME 2. Touch the Delay Start button repeatedly 1. Press the button ON/OFF to cancel the until the display shows the desired delay time. programme and to deactivate the appliance. 3. Touch the Start/Pause button again to start 2.
  • Page 21: Hints And Tips

    END OF THE PROGRAMME 2. Press theStart/Pause button: When the programme has finished, the appliance • If you have set Rinse Hold stops automatically. The acoustic signals operate (if appliance drains the water and spins. they are active). The display shows •...
  • Page 22: Stubborn Stains

    a. interrupt the programme and open the – powder detergents for all types of fabric, door (refer to "Daily Use" chapter); excluding delicate. Prefer powder b. manually redistribute the load so that the detergents containing bleach for whites and items are spaced evenly around the tub; laundry sanitization, c.
  • Page 23: Water Hardness

    • Set the maximum possible spin speed for softener for washing machines. In areas where the the selected washing programme before water hardness is soft it is not necessary to use a drying your laundry in a tumble dryer. This water softener.
  • Page 24 • Wait until mains supply is stable. The mains supply is un- stable. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions.
  • Page 25: Care And Cleaning

    Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before you wash The washing results are the laundry. not satisfactory. • Make sure that you set the correct temperature. •...
  • Page 26: Maintenance Wash

    DESCALING small items can be recovered at the end of the cycle. If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines. Regularly examine the drum to check for limescale. Regular detergents already contain water softening agents, but we recommend to run a cycle with an empty drum and a descaling product occasionally.
  • Page 27: Cleaning The Inlet Hose And The Valve Filter

    CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° EMERGENCY DRAIN 3. Put the two ends of the inlet hose in a container and let the water flow out of the If the appliance cannot drain the water, carry out hose.
  • Page 28: Troubleshooting

    TROUBLESHOOTING WARNING! Refer to Safety chapters. CONSUMPTION VALUES INTRODUCTION See the web link www.theenergylabel.eu for detailed informa- tion about Energy Label. The QR codes on the EU and UK energy labels supplied with the appliance provide a web link to the information related to the per- formance of the appliance.
  • Page 29 ACCORDING TO UK ECODESIGN FOR ENERGY-RELATED PRODUCTS AND ENERGY INFORMATION REGULATIONS AND TO EU ECODESIGN REGULATION 2019/2023 AND THE EU ENERGY LABEL REGULATION 2019/2014 Eco 40-60 pro- Litres hh:mm °C gramme Full load 0.760 64.0 3:40 53.00 1351 Half load 0.440 47.0 2:45...
  • Page 30: Environmental Concerns

    Programme Litres hh:mm °C Wool 0.30 70.0 1:05 30.00 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry. ENVIRONMENTAL CONCERNS with the symbol with the household waste.
  • Page 32 WWW.ZANUSSI.COM/SHOP...

Table of Contents