Simplex Memory Channels; Split Memory Channels; Recalling Memory Channels; Using The Enc Control - Kenwood TH-79A Instruction Manual

frequency from a split memory channel or split
Cail channel is not stored.
If the memory channel selected in the
previous step already contained data, the new
data overwrites the previous data.
The previous mode is restored.
m Split Memory Channels
After storing the receive frequency using
"Simplex Memory Channels" {page 23}, select
the desired transmit frequency.
Press [F].
Turn the ENC control to select the memory
channel containing the receive frequency.
Press [PTT]+[MR IN].
1
24
.
The transmit frequency is stored and the
previous mode is restored.
If the memory channel selected does not
contain a receive frequency, your dual bander
beeps and restores the previous mode.
Associated data such as Tone
status/frequency, frequency step, and DTSS
status/code are not overwritten. However,
Transmit Offset status and Reverse status are
erased.
RECALLING MEMORY CHANNELS
E Using the ENC Control
1
2
Press [BAND] to select the Operating band.
Press [MR].
+ The memory channel used last is recalled.
"If all memory channels are empty, your dual
bander beeps and Memory Recall is not
selected.
Turn the ENC control to select the desired
memory channel.
* Clockwise: Increases the channel number.
Decreases the channel
number.
* Counterclockwise:
m Using the Keypad
1
2
3
Press [BAND] to select the Operating band.
Press [MR].
- The memory channel used last is recalled.
Enter a 2-digit number (00 to 79) to select the
desired memory channel.