Honda ODYSSEY 2024 Owner's Manual page 615

Wiper
Blade
Holder
Cap
Changing the Rear Wiper Blade Rubber
Wiper
Blade
Wiper
Arm
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
5. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
6. Install the end of the wiper blade into the
cap.
7. Slide the holder onto the wiper arm until it
locks.
8. Lower both wiper arms.
9. Set the power mode to ON and hold the
wiper switch in the MIST position until both
wiper arms return to the standard position.
1. Raise the wiper arm off.
2. Pivot the bottom end of the wiper blade up
until it comes off from the wiper arm.
1Changing the Rear Wiper Blade Rubber
NOTICE
Do not try to forcefully lift up the wiper arm.
The wiper arm may be damaged if it is lifted too high.
NOTICE
Avoid dropping the wiper arm, as it may damage the
rear window.
Continued 613