Honda ODYSSEY 2024 Owner's Manual page 482

uuWhen DrivinguShifting
■
Shift Operation
480
M (sequential mode) Indicator
Tachometer red zone
Sequential Mode Gear Selection
Indicator
Gear Position Indicator
Press the
Pull back the
Press the
Press the
Each time you press the button, the
mode switches between Drive and S
Position mode.
Shift Button
Indicator
( P button.
button.
( R
( N button.
button.
D/S
1Shift Operation
NOTICE
When you change to and vice versa, depress
( D ( R
the brake pedal to come to a complete stop, then
select the intended gear position while maintaining
brake pressure.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all the gear position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in ( N , ( P or ( R
be cut off even without the engine speed entering
the tachometer red zone.
The beeper sounds once when you change to
2 Customized Features P. 413
, the fuel supply may
.
( R