Honda ODYSSEY 2024 Owner's Manual page 100

uuIndicatorsu
Indicator Name
Auto High-Beam
Indicator
Fog Light
Indicator
Indicator
Immobilizer
System Indicator
Indicator
Security System
Alarm Indicator
*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
98
On/Blinking
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on when all the operating
conditions of the Auto high-beam
are met.
• Comes on when the fog lights are
on.
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks if the immobilizer system
cannot recognize the key
information.
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks when the security system
alarm has been set.
Explanation
2 Auto High-Beam P. 197
2 Fog Lights P. 195
• Blinks - You cannot start the engine. Set
the power mode to VEHICLE OFF
select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
• Do not attempt to alter this system or
add other devices to it. Electrical
problems can occur.
2 Security System Alarm P. 181
Message
—
—
*1 , then
—