Samsung AM TN4 KH Series Installation Manual page 24

Installation Procedure
b Set the SEG20 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
16 Press the (Mode) button. Fan and Off appear on the remote control display.
17 Set the SEG21 and SEG22 values:
a Set the SEG21 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG22 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
18 Press the (Mode) button. Heat and Off appear on the remote control display.
19 Set the SEG23 and SEG24 values:
a Set the SEG23 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG24 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
24
English
Steps
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
Remote control display
SEG20
SEG21
SEG22
SEG23
SEG24