LG 43UT781H Series Owner's Manual page 36

17 [Equalizer] (Command : j v)
►To adjust equalizer.
Transmission
(j)(v)( )([Set ID])( )([Data])(Cr)
MSB
0 0 0 0
Frequency
7 6 5 Frequency 4 3 2 1 0
0 0 0 1st Band 0 0 0 0 0
0 0 1 2nd Band 0 0 0 0 1
0 1 0 3rd Band ... ... ... ... ...
0 1 1 4th Band 1 0 0 1 1
1 0 0 5th Band 1 0 1 0 0
Ack
(v)( )([Set ID])( )(OK/NG)([Data])(x)
18 Tune Command (Command: m a)
►Select channel to following physical number.
Transmission
(m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr)
[Data] 00 : High channel data
[Data] 01 : Low channel data
ex. No. 47 00 2F (2FH)
No. 394 01 8A (18AH),
DTV No. 0 Don't care
[Data] 02 : (Antenna)
0 x 00 : Analogue Main
0 x 10 : DTV Main
0 x 20 : Radio
(Cable)
0 x 80 : Analogue Main
0 x 90 : DTV Main
0 x A0 : Radio
(Satellite) (Depending on model)
0 x 40 : DTV Main
0 x 50 : Radio Main
Channel data range
Min : 00 Max : 270F (0 to 9999)
28
LSB
0 0 0 0
Data
Step
0 (decimal)
1 (decimal)
...
19 (decimal)
20 (decimal)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
19 Programme [Skip/Add] (Command: m b)
►To set skip status for the current Programme.
Transmission
(m)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Skip]
[Data] 01 : [Add]
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
20 Key (Command: m c)
►To send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )([Data])(Cr)
[Data] IR CODES
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
21 Control [Backlight] (Command: m g)
►To control the backlight.
Transmission
(m)(g)( )([Set ID])( )([Data])(Cr)
[Data] Min : 00 to Max : 64
Ack
(g)( )([Set ID])( )(OK/NG)([Data])(x)