Table of Contents
Advertisement
1
Orange ring on horizontal bracket
2
Cable chain
b.
Gently insert your finger into the orange ring.The figure shows the orange ring on the horizontal
bracket being pushed down so that the rest of the cable chain can be pulled out of the
enclosure.
c.
Pull your finger toward you to unplug the cable chain.
Step 7.
Carefully pull the entire cable chain out of the drive shelf.
Step 8.
From the back of the drive shelf, remove the left fan module.
Step 9.
Follow these steps to disconnect the left cable chain from its vertical bracket:
a.
Using a flashlight, locate the orange ring on the end of the cable chain attached to the vertical
bracket.
b.
Insert your finger into the orange ring.
c.
To unplug the cable chain, pull your finger toward you approximately 1 inch (2.5 cm), but leave
the cable chain connector within the vertical bracket.
Step 10. Disconnect the left cable chain from the horizontal bracket, and pull the entire cable chain out of
the drive shelf.
22
Service Guide for DM120S, DM240S, and DM600S
Advertisement
Table of Contents
