Russound BTC-2 Manual page 15

Use a BSK-2 to add Bluetooth without Needing an Available Audio Input
Input Saver Feature allows the BSK-2 to be used in any system
CAT5 is the only cable needed - carries power, data and audio
BTC-2X
POOL
INSTALLER'S DILEMMA
The homeowner has been using a multichannel amplifier with a bus input for a
simple, single-source multiroom audio system. They want to add Bluetooth but
their amplifier only has one input that they are already using. There isn't a free
input to add a typical Bluetooth device.
BENEFITS
• The homeowner can continue using the existing audio source, whatever it may be
• Whenever they want to use Bluetooth, the audio signal will automatically switch to Bluetooth and then will switch back after the Bluetooth stops
• No control system is needed for the switching. It will all happen automatically
CAT5 up to 500' feet
LIVING ROOM
CD Player
USB
Power
Supply
Any brand Amplifier or Receiver
SOLUTION
• Add a BSK-2 Bluetooth Source Kit
• Use a CAT5 cable to place the BTC-2X wherever it needs to be in or around the home
(up to 500')
• Connect the existing audio source to the analog audio input on the BTC-2
• Connect the audio output from the BTC-2 to your amplifier audio input
• Rename the BTC-2X using Russound's free BTC-2X Re-naming App to "Pool" or whatever
custom name you'd like depending on the location in order to make it easy for family and
guests to find
BTC-2
Audio connections can
be in the room they
need to be and the
Bluetooth radio can be
where it needs to be -
the perfect solution for
Bluetooth Audio