Download Print this page
Russound BTC-2X Installation Manual

Russound BTC-2X Installation Manual

Bluetooth remote transceiver

Advertisement

Quick Links

BTC-2X
REMOTE PAIR
AUDIO
POWER
OUT
PAIR
5V 2A
BTC-2X
TO BTC-2 or MCA
Bluetooth Remote Transceiver
I N S T A L L A T I O N G U I D E

Advertisement

loading

Summary of Contents for Russound BTC-2X

  • Page 1 BTC-2X REMOTE PAIR AUDIO POWER PAIR 5V 2A BTC-2X TO BTC-2 or MCA Bluetooth Remote Transceiver I N S T A L L A T I O N G U I D E...
  • Page 2: Operation

    Audio Out to the BTC-2X. When not connected to a phone or tablet, the BTC-2X will always be available to pair with any new Source Number Switch (Only used device within range that requests pairing.
  • Page 3 The Russound controller has an RJ-45 port on the rear panel that is used to connect a CAT5 cable to the BTC-2X. The automated contact closure from a smart home control system.
  • Page 4: Specifications

    Bluetooth Version controller. The CAT5 cable can be up to 500’ (152m) long. This allows the BTC-2X to be placed in the room or area where you want to have access to a Bluetooth audio source. The BTC-2X has approximately 65’ (20m) of range...
  • Page 5: Limited Warranty

    LIMITED WARRANTY prior written permission will be returned to sender. Russound The Russound BTC-2X is guaranteed for two (2) years from sells products only through authorized Dealers and Distributors the date of purchase against all defects in materials and to ensure that customers obtain proper support and service.