Samsung WW95K5 Series User Manual page 51

Code
DC3
OC
LC, LC1
UB
3C
UC
WW85K5410WW_DC68-03677A-04_EN(Add WW95K5410UW).indd 51
The Add Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
Water is overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
Make sure the drain hose is not clogged.
•
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "LC,LC1" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "UB" check message will
be shown in the display.
Check the motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
If the information code remains, contact a customer service
•
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
Action
English 51
2017/9/5 17:26:50