Samsung WW95K5 Series User Manual page 30

Operations
05 Spin
06 Options
07 Bubble Soak
08 Delay End
09 Quick Wash
15'/30'
10 Power
11 Start/Pause
30 English
WW85K5410WW_DC68-03677A-04_EN(Add WW95K5410UW).indd 30
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The final rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin process.
• No Spin : The drum does not spin after the final drain process.
• Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then, press
Start/Pause to start the cycle. The spinning time depends on the
selected cycle.
Press to select an option from Intensive, Pre Wash, Press again to
deselect.
• Availability of the options depends on the cycle.
Press to activate/deactivate the Bubble Soak function. This
function helps remove a wide variety of stubborn stains.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
For lightly soiled garments of less than 2 kg that you want to wash
quickly.
• This option is available only when the COTTON cycle is selected.
• The cycle time is subject to change, depending on the detergent
amount, water level, and contamination level of the load.
Press to turn on/off the washing machine.
Press to start or stop operation.
2017/9/5 17:26:45